School of Technology

TECH 13580 - Engineering Graphics I

 

Click on links below to enter your destination.

Home
Up

 

 

Orthographic

X

X

X

X

X

X

X

X

1

X

X

2

X

X

X

X

X

X

X

X

X

X

X

X

X

X

3

 

 

 

 

 

 

 

 

 

 

4

 

X

X

X

X

X

X

X

X

X

 

X

X

 

X

X

X

X

X

 

X

5

X

X

X

X

X

X

X

X

 

X

6

 

 

7

 

X

X

 

X

 

X

X

X

X

X

8

 

 

 

 

X

 

X

 

X

9

 

 

 

 

X

X

X

X

X

X

X

X

 

X

X

 

X

 

X

X

X

 

X

 

X

X

X

10

 

 

11

      

X

 

X

X

X

X

X

 

X

X

X

X

X

X

X

X

 

X

X

X

X

 

X

12

 

 

 

 

 

 

X

X

13

X

X

X

 

X

14

X

X

 

X

 

X

X

X

 

X

X

X

15

 

 

 

 

 

 

 

 

 

 

 

 

X

X

X

X

X

X

X

X

 

X

X

X

 

X

 

X

X

X

X

 

X

X

X

X

X

X

X

X

 

X

X

16

X

X

X

X

X

17

 

 

 

 

 

 

18

 

X

X

 

X

X

 

X

X

X

X

19

X

X

 

X

X

X

X

 

X

X

X

 

X

X

 

X

20

X

X

21

 

 

 

 

 

X

X

 

X

X

X

 

X

X

 

X

 

X

X

 

X

X

 

X

X

X

X

 

X

X

X

X

X

X

 

X

 

X

X

 

X

X

X

X

X

X

X

X

X

22

 

 

 

 

 

 

 

 

 

 

 

X

X

X

X

X

X

X

X

X

X

X

X

X

 

X

 

X

X

 

X

X

X

X

X

X

X

X

X

23

 

 

 

 

 

X

 

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 

X

X

X

X

X

X

X

X

X

X

X

X

Across Clues

Down Clues
3. The most common engineering drawings. 1. The plane through which you see the front view.
6. A measurement shared by the front and top views. 2. The plane through which you see the top view.
8. A measurement shared by the top and side views. 4. The distance you are considered to be from the object in orthographic.
9. The system of projection used in the United States. 5. The view which can be placed in its alternate position.
10. The plane through which you see the side view. 7. How many centerlines to establish a holes coordinates.
12. A line used to show path of motion. 11. The most descriptive view.
15. The planes of projection are mutually __. 12. The lines of site are __.
17. A classification under orthographic projection. 13. The measurement shared by the front and side views.
21. A type of line to show the outline of an object. 14. Maximum number of normal views.
22. The accepted practice which saves time and may even violate "rules" for clarity. 16. A surface perpendicular to one plane of projection.
23. Another word for oblique. 18. A surface parallel to your line of sight.
  19. A surface true size and perpendicular to two planes of projection.
  20. A surface not perpendicular to any plane of projection.