School of Technology

TECH 13580 - Engineering Graphics I

 

Click on links below to enter your destination.

Home
Up

 

 

Shop Processes

X

1

X

2

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 

X

 

X

X

X

3

X

X

X

4

X

X

X

X

X

X

5

X

X

 

X

 

X

X

X

 

X

6

 

 

 

X

7

X

8

 

 

 

X

 

X

 

X

9

 

 

 

 

X

 

X

X

 

X

X

X

 

X

X

 

X

 

X

X

X

 

X

 

X

 

X

10

 

 

 

 

 

X

X

11

 

 

 

 

 

 

X

 

X

 

X

X

 

X

X

X

 

X

X

X

X

X

X

X

X

X

X

 

X

X

12

X

 

X

X

X

X

X

X

X

X

X

 13                  

 

X

X

X

X

X

X

X

X

X

 

X

X

X

X

 

X

X

 

X

 

X

14

X

X

X

X

X

15

X

 

X

X

16

X

X

X

X

 

X

X

17

 

 

 

 

X

X

 

X

 

X

18

 

 

 

X

X

X

X

X

X

 

X

X

X

X

X

 

X

 

X

X

 

X

X

X

19

 

 

 

 

 

 

X

X

20

X

 

X

 

X

X

 

X

X

X

X

X

X

X

X

 

X

X

X

 

X

 

X

 

X

X

21

 

 

 

 

 

 

 

 

 

X

X

X

 

X

 

X

 

X

X

 

X

X

X

X

X

X

X

X

 

X

X

X

22

 

 

 

 

 

 

 

 

X

X

X

X

X

X

X

X

X

X

X

 

X

 

X

 

X

X

 

X

X

X

X

X

X

X

X

X

X

X

X

 

X

X

X

 

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 

Across Clues

Down Clues
6. Object used to create a cavity in a casting. 1. __ rule for casting.
8. Tool to make a hole smooth and round. 2. Groove cut in a pulley to contain a key.
9. Excess material from a forging. 3. Sloping sides of a pattern
10. Continuous filing tool. 4. __ press to make holes.
11. Cavity cut in a shaft to locate a key. 5. "King of machine tools".
13. Concentric hole with vertical sides to hold a bolt below the surface. 6. Similar to bevel.
17. Round cylindrical pin. 7. __ caliper for accuracy.
18. Groove cut by a saw. 12. Pound elevated surface.
19. Process to form steel with dies. 13. Concentric hole with sloping sides used to recess a flat head machine screw
21. Tool to accurately measure diameters within .001". 14. Another name for sand casting.
22. General term to produce parts by cutting material. 15. Shallow concentric hole with vertical sides.
  16. Product produced by welding parts.
  20. Process of forming sheet metal.